🧰 How to use
1️⃣ Surface preparation
Clean and degrease the area to be treated thoroughly
Remove rust, dust, old paint and loose particles
The surface must be dry and clean
2️⃣ Mixing
Mix the base component with the hardener in the ratio specified by the manufacturer (usually about 2–3% hardener)
Stir well until a homogeneous mass is obtained
3️⃣ Application
Apply the mixture with a spatula to the desired area
Level as best as possible
Work quickly – the processing time is limited (usually 4–6 minutes)
4️⃣ Drying and processing
Let it dry completely (approximately 20–30 minutes at room temperature)
After hardening, sand to a smooth surface
If necessary, apply a second coat or switch to a finishing putty
⚠️ Safety tips
Work in a well-ventilated area
Use gloves and a mask when mixing and sanding
Keep away from children and sources in heat
NIGRIN filler putty 250 gr
# 74953€ 4.34
Out of stock
| Brand |
|
|---|---|
| SKU | 74953 |
| Barcode | 4008153749537 |
| Weight | 0.311 kg |
Only logged in customers who have purchased this product may leave a review.
Related products
Updating…
There are no reviews yet.