🛠️ INSTRUCTIONS FOR USE:
1️⃣ Remove rust, degrease, clean, and sand the surface
2️⃣ Mix NIGRIN fiberglass polyester filler with hardener in a 98% filler : 2% hardener ratio
👉 Recommendation: golf-ball-sized amount of filler + pea-sized amount of hardener
3️⃣ Mix thoroughly and apply quickly
⏱️ Hardening starts after 5–6 minutes, fully cures in about 30 minutes
4️⃣ Shape with coarse sandpaper, then smooth and finish with fine filler and polishing
🔧 APPLICATION:
✔️ Suitable for all car body surfaces
✔️ Repairs small deformations, holes, and cracks
✔️ Flexible and resistant to vibrations and bending
⚗️ COMPOSITION:
25–50% Dibenzoyl peroxide
⚠️ HAZARD WARNINGS:
👁️ H319 – Causes serious eye irritation
🧴 H317 – May cause an allergic skin reaction
🔥 H242 – Heating may cause a fire
🌊 H400 – Very toxic to aquatic life
🌍 H410 – Very toxic to aquatic life with long-lasting effects
🛡️ SAFETY PRECAUTIONS:
ℹ️ P101 – If medical advice is needed, have the product container or label at hand
🚫 P102 – Keep out of reach of children
🔥 P210 – Keep away from heat, sparks, open flames. No smoking
🌍 P273 – Avoid release into the environment
🧤 P280 – Wear protective gloves/eye protection/face mask
👁️ P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water, remove contact lenses if present and continue rinsing
👁️ P337 + P313 – If eye irritation persists: Get medical advice/attention
🧴 P302 + P352 – IF ON SKIN: Wash with plenty of soap and water
🩹 P333 + P313 – If skin irritation or rash occurs: Get medical advice/attention
❄️ P411 + P235 – Store in a cool, dry place below 30°C
🗑️ P501 – Dispose of contents/container in accordance with local regulations
There are no reviews yet.