🔧 Surface preparation:
🧹 Remove rust
🧽 Degrease
🪚 Clean and sand
🧪 Mixing and application:
Mixing ratio: 98% filler : 2% hardener
Recommended for one application:
⚪ Golf-ball amount of filler
🟢 Pea-sized amount of hardener
Mix well and apply quickly.
⏱️ Curing and processing:
⌛ Curing begins: 5–6 min
🕒 Fully cured: ~30 min
🪚 Afterwards: sand and proceed with body repair
🎨 Can be painted directly after polishing
✨ Product properties:
🛠️ 2-in-1 universal filler – filling and fine finishing
🕳️ Fills dents and levels scratches
🎯 Can be applied in the desired thickness
💪 Cures without cracking
🪚 Easy to process and sand
⚠️ Hazards:
👁️ H319 – Causes serious eye irritation
🖐️ H317 – May cause an allergic skin reaction
🔥 H242 – Heating may cause a fire
🌊 H400 / H410 – Very toxic to aquatic life with long-lasting effects
🛡️ Safety recommendations:
🧾 P101 – If medical advice is needed, have container or label at hand
🚫 P102 – Keep out of reach of children
🔥 P210 – Keep away from heat, sparks, open flame – no smoking
🌍 P273 – Avoid release into the environment
🧤 P280 – Wear gloves, protective goggles, and a mask
👁️ If in eyes:
P305 + P351 + P338 – Rinse cautiously with water, remove lenses if present, continue rinsing
🆘 P337 + P313 – If irritation persists, seek medical assistance
🖐️ If on skin:
P302 + P352 – Wash thoroughly with soap and water
🚑 P333 + P313 – If rash or irritation occurs, seek medical attention
📦 Storage and disposal:
🌡️ P411 + P235 – Store in a cool, dry place, up to 30°C
🗑️ P501 – Dispose of contents/container according to local/national regulations
There are no reviews yet.