MICHELIN Top Up Mini Cordless Tire Inflator

Key Features:
Rechargeable lithium-ion battery – allows cordless operation anywhere
Maximum pressure: up to 120 psi (8.3 bar) – suitable for car, motorcycle, and bicycle tires
Digital backlit LCD display – shows accurate pressure readings (in psi, bar, kPa)
Automatic shut-off – the inflator stops when the preset pressure is reached
Built-in LED light – convenient for low-light use or emergencies
USB-C charging port – compatible with most modern chargers
Technical Specifications:
Power supply: Built-in battery + USB-C charging
Capacity: Enough to inflate 1–2 car tires on a single charge
Display: Digital, with selectable measurement units
Size: Compact and lightweight – fits in the palm of your hand
Included accessories: Nozzles for car and bicycle valves, balls, and more
Advantages:
Perfect for emergencies, short trips, and daily maintenance
Easy to store in the glovebox or organizers
Suitable for cars, motorcycles, bicycles, scooters, and sports equipment
Instructions for Use – MICHELIN Top-Up Mini Rechargeable Inflator
The MICHELIN Top-Up Mini compact rechargeable inflator is designed for quick and easy top-ups of tires and inflatable accessories—anywhere and anytime.
1. Charging the Device
Connect the inflator to a USB-C charger using the included cable.
Allow it to charge fully (usually around 2–3 hours).
The display indicator will show when the battery is fully charged.
2. Preparing for Use
Select and attach the appropriate nozzle (included: car valve, bicycle valve, ball needle, etc.).
Screw or clip the nozzle onto the tire/valve.
Make sure the connection is secure and airtight.
3. Setting the Pressure
Turn on the device using the Power button.
Use the “+” and “–” buttons to set the desired pressure (psi, bar, or kPa).
Switch between units using the appropriate button (if available).
4. Inflation
Press the Start (or Power) button again to begin inflation.
The inflator will automatically shut off once the preset pressure is reached.
If needed, you can stop it manually by pressing the button.
5. After Finishing
Carefully unscrew the hose from the valve.
Check the pressure again if necessary.
Turn off the device and store the cable and nozzles back in the box or organizer.